conf_usb.h File Reference

#include "modules/usb/usb_commun.h"
#include "modules/usb/usb_commun_hid.h"

Include dependency graph for conf_usb.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Defines
#define	USB_HOST_FEATURE   DISABLED
#define	USB_DEVICE_FEATURE   ENABLED
#define	USE_USB_PADS_REGULATOR   ENABLE
#define	VID_PID_TABLE
#define	CLASS_SUBCLASS_PROTOCOL
#define	SIZEOF_DATA_STAGE   250
	The size of RAM buffer reserved of descriptors manipulation.
#define	DEVICE_ADDRESS   0x05
	The address that will be assigned to the connected device.
#define	HOST_STRICT_VID_PID_TABLE   DISABLE
	The host controller will be limited to the strict VID/PID list.
#define	HOST_AUTO_CFG_ENDPOINT   ENABLE
	Try to configure the host pipe according to the device descriptors received.
#define	HOST_CONTINUOUS_SOF_INTERRUPT   DISABLE
	Host start of frame interrupt always enable.
#define	HOST_ERROR_RESTART   ENABLE
	When Host error state detected, goto unattached state.
#define	ID_PIN_CHANGE_GENERATE_RESET   DISABLE
	Force WDT reset upon ID pin change.
#define	NAK_TIMEOUT_DELAY   1
	NAK handshake in 1/4sec (250ms) before timeout.
#define	User_configure_endpoint()
	If no auto configuration of EP, map here user function.
#define	Usb_id_transition_action()
#define	Host_device_disconnection_action()
#define	Host_device_connection_action()
#define	Host_sof_action()
#define	Host_suspend_action()
#define	Host_hwup_action()
#define	Host_device_not_supported_action()
#define	Host_device_supported_action()
#define	Host_device_error_action()
#define	USB_DEVICE_SN_USE   DISABLE
#define	USE_DEVICE_SN_UNIQUE   DISABLE
#define	NB_ENDPOINTS   2
#define	EP_KBD_IN   1
#define	USB_REMOTE_WAKEUP_FEATURE   ENABLE
#define	Usb_unicode(a)   ((U16)(a))
#define	Usb_sof_action()
#define	Usb_wake_up_action()
#define	Usb_resume_action()
#define	Usb_suspend_action()   suspend_action();
#define	Usb_reset_action()
#define	Usb_vbus_on_action()   keyboard_task_init();
#define	Usb_vbus_off_action()
#define	Usb_set_configuration_action()
Functions
void	sof_action (void)
void	suspend_action (void)
void	keyboard_task_init (void)
	This function initializes the hardware/software ressources required for keyboard task.

---

Detailed Description

This file contains the possible external configuration of the USB - Compiler: IAR EWAVR and GNU GCC for AVR

• Supported devices: AT90USB1287, AT90USB1286, AT90USB647, AT90USB646

  Author:

  Atmel Corporation: http://www.atmel.com
  Support and FAQ: http://support.atmel.no/

Definition in file conf_usb.h.

---