conf_usb.h File Reference

#include "modules/usb/usb_commun.h"
#include "modules/usb/usb_commun_ms.h"
#include "lib_board/avr_ms_board/avr_ms_board_drv.h"

Include dependency graph for conf_usb.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Defines

#define USB_HOST_FEATURE   DISABLED

#define USB_DEVICE_FEATURE   ENABLED

#define USE_USB_PADS_REGULATOR   ENABLE

#define VID_PID_TABLE

#define CLASS_SUBCLASS_PROTOCOL

#define SIZEOF_DATA_STAGE   250

The size of RAM buffer reserved of descriptors manipulation.

#define DEVICE_ADDRESS   0x05

The address that will be assigned to the connected device.

#define MAX_INTERFACE_SUPPORTED   0x03

The maximum number of interface that can be supported (composite device).

#define MAX_EP_PER_INTERFACE   3

The maximum number of endpoints per interface supported.

#define HOST_STRICT_VID_PID_TABLE   DISABLE

The host controller will be limited to the strict VID/PID list.

#define HOST_AUTO_CFG_ENDPOINT   ENABLE

Try to configure the host pipe according to the device descriptors received.

#define HOST_CONTINUOUS_SOF_INTERRUPT   ENABLE

Host start of frame interrupt always enable.

#define HOST_ERROR_RESTART   DISABLE

When Host error state detected, goto unattached state.

#define USB_HOST_PIPE_INTERRUPT_TRANSFER   DISABLE

USB host pipes transfers use USB communication interrupt (allows to use none blocking functions).

#define ID_PIN_CHANGE_GENERATE_RESET   ENABLE

Force WDT reset upon ID pin change.

#define TIMEOUT_DELAY_ENABLE   ENABLE

Enable Timeout delay (time) for host transfer.

#define TIMEOUT_DELAY   10

delay 1/4sec (250ms) before timeout value

#define NAK_TIMEOUT_ENABLE   DISABLE

Enable cpt NAK Timeout for host transfer.

#define NAK_SEND_TIMEOUT   0x0FFF

Number of NAK handshake before timeout for transmit functions (up to 0xFFFF).

#define NAK_RECEIVE_TIMEOUT   0x0FFF

NAKNumber of NAK handshake before timeout for receive functions (up to 0xFFFF).

#define SOFTWARE_VBUS_CTRL   ENABLE

For reduced host only allows to control VBUS generator with PIO PE.7.

#define User_configure_endpoint()

If no auto configuration of EP, map here user function.

#define Usb_id_transition_action()

#define Host_device_disconnection_action()   Led0_off()

#define Host_device_connection_action()   Led0_on()

#define Host_sof_action()   host_sof_action()

#define Host_suspend_action()

#define Host_hwup_action()

#define Host_device_not_supported_action()

#define Host_device_class_not_supported_action()   Led0_off()

#define Host_device_supported_action()

#define Host_device_error_action()

#define USB_DEVICE_SN_USE   ENABLE

#define USE_DEVICE_SN_UNIQUE   DISABLE

#define NB_ENDPOINTS   2

#define EP_MS_IN   1

#define EP_MS_OUT   2

#define Usb_unicode(a)   ((U16)(a))

#define USB_REMOTE_WAKEUP_FEATURE   DISABLE

#define Usb_sof_action()

#define Usb_wake_up_action()

#define Usb_resume_action()

#define Usb_suspend_action()   nf_usb_stop()

#define Usb_reset_action()

#define Usb_vbus_on_action()

#define Usb_vbus_off_action()   nf_usb_stop()

#define Usb_set_configuration_action()

#define Scsi_start_read_action()   Led_ms_read_on()

#define Scsi_stop_read_action()   Led_ms_read_off()

#define Scsi_start_write_action()   Led_ms_write_on()

#define Scsi_stop_write_action()   Led_ms_write_off()

Functions

void host_sof_action (void)

void nf_usb_stop (void)

This function perform a last copy tail if required, when USB enters suspend or is disconnected This function may be declared in "conf_usb.h" for "Usb_suspend_action()" and "Usb_vbus_off_action()" /!\ "g_last_log_sector" must be initialized to "0xFFFFFFFF" at startup to avoid spurious writes on during USB plug-in.

Detailed Description

This file contains the possible external configuration of the USB - Compiler: IAR EWAVR and GNU GCC for AVR

Supported devices: AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
Author:
Atmel Corporation: http://www.atmel.com
Support and FAQ: http://support.atmel.no/

Definition in file conf_usb.h.

Generated on Fri Oct 31 14:31:25 2008 for ATMEL by

1.5.3


Defines
#define	USB_HOST_FEATURE DISABLED
#define	USB_DEVICE_FEATURE ENABLED
#define	USE_USB_PADS_REGULATOR ENABLE
#define	VID_PID_TABLE
#define	CLASS_SUBCLASS_PROTOCOL
#define	SIZEOF_DATA_STAGE 250
	The size of RAM buffer reserved of descriptors manipulation.
#define	DEVICE_ADDRESS 0x05
	The address that will be assigned to the connected device.
#define	MAX_INTERFACE_SUPPORTED 0x03
	The maximum number of interface that can be supported (composite device).
#define	MAX_EP_PER_INTERFACE 3
	The maximum number of endpoints per interface supported.
#define	HOST_STRICT_VID_PID_TABLE DISABLE
	The host controller will be limited to the strict VID/PID list.
#define	HOST_AUTO_CFG_ENDPOINT ENABLE
	Try to configure the host pipe according to the device descriptors received.
#define	HOST_CONTINUOUS_SOF_INTERRUPT ENABLE
	Host start of frame interrupt always enable.
#define	HOST_ERROR_RESTART DISABLE
	When Host error state detected, goto unattached state.
#define	USB_HOST_PIPE_INTERRUPT_TRANSFER DISABLE
	USB host pipes transfers use USB communication interrupt (allows to use none blocking functions).
#define	ID_PIN_CHANGE_GENERATE_RESET ENABLE
	Force WDT reset upon ID pin change.
#define	TIMEOUT_DELAY_ENABLE ENABLE
	Enable Timeout delay (time) for host transfer.
#define	TIMEOUT_DELAY 10
	delay 1/4sec (250ms) before timeout value
#define	NAK_TIMEOUT_ENABLE DISABLE
	Enable cpt NAK Timeout for host transfer.
#define	NAK_SEND_TIMEOUT 0x0FFF
	Number of NAK handshake before timeout for transmit functions (up to 0xFFFF).
#define	NAK_RECEIVE_TIMEOUT 0x0FFF
	NAKNumber of NAK handshake before timeout for receive functions (up to 0xFFFF).
#define	SOFTWARE_VBUS_CTRL ENABLE
	For reduced host only allows to control VBUS generator with PIO PE.7.
#define	User_configure_endpoint()
	If no auto configuration of EP, map here user function.
#define	Usb_id_transition_action()
#define	Host_device_disconnection_action() Led0_off()
#define	Host_device_connection_action() Led0_on()
#define	Host_sof_action() host_sof_action()
#define	Host_suspend_action()
#define	Host_hwup_action()
#define	Host_device_not_supported_action()
#define	Host_device_class_not_supported_action() Led0_off()
#define	Host_device_supported_action()
#define	Host_device_error_action()
#define	USB_DEVICE_SN_USE ENABLE
#define	USE_DEVICE_SN_UNIQUE DISABLE
#define	NB_ENDPOINTS 2
#define	EP_MS_IN 1
#define	EP_MS_OUT 2
#define	Usb_unicode(a) ((U16)(a))
#define	USB_REMOTE_WAKEUP_FEATURE DISABLE
#define	Usb_sof_action()
#define	Usb_wake_up_action()
#define	Usb_resume_action()
#define	Usb_suspend_action() nf_usb_stop()
#define	Usb_reset_action()
#define	Usb_vbus_on_action()
#define	Usb_vbus_off_action() nf_usb_stop()
#define	Usb_set_configuration_action()
#define	Scsi_start_read_action() Led_ms_read_on()
#define	Scsi_stop_read_action() Led_ms_read_off()
#define	Scsi_start_write_action() Led_ms_write_on()
#define	Scsi_stop_write_action() Led_ms_write_off()
Functions
void	host_sof_action (void)
void	nf_usb_stop (void)
	This function perform a last copy tail if required, when USB enters suspend or is disconnected This function may be declared in "conf_usb.h" for "Usb_suspend_action()" and "Usb_vbus_off_action()" /!\ "g_last_log_sector" must be initialized to "0xFFFFFFFF" at startup to avoid spurious writes on during USB plug-in.