config.h File Reference

#include "lib_mcu/compiler.h"
#include "conf/conf_scheduler.h"
#include "lib_board\usb_key\usb_key.h"

Include dependency graph for config.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Defines

#define PROD_TEST   DISABLE

#define USE_ADC

Enable (define) or not (undefine) the ADC usage.

#define USBKEY   1

To include proper target hardware definitions, select target board (USBKEY).

#define TARGET_BOARD   USBKEY

#define FOSC   8000

CPU core frequency in kHz.

#define HID_GENERIC_DEMO_FULL   DISABLE

Define it to generate a firmware compatible with HID Generic Demo FULL.

#define HOST_SYNC_MODE   ENABLE

#define BAUDRATE   57600

#define USE_UART2

#define UART_U2

#define uart_putchar   putchar

#define r_uart_ptchar   int

#define p_uart_ptchar   int

#define ADC_PRESCALER   32

ADC Prescaler value.

#define ADC_RIGHT_ADJUST_RESULT   1

Right adjust.

#define ADC_INTERNAL_VREF   2

AVCC As reference voltage (See adc_drv.h).

#define SBC_VENDOR_ID   {'A','T','M','E','L',' ',' ',' '}

#define SBC_PRODUCT_ID   {'A','T','9','0','U','S','B','1','2','8',' ','M',' ','S',' ',' '}

#define SBC_REVISION_ID   {'0','.','0','0'}

#define NB_IDLE_POLLING_SOF   2

--------- Device Mouse configuration -------------------------------------

#define MOUSE_SPEED   4

#define MAX_FILE_LENGHT   30

Detailed Description

This file contains the system configuration definition.

Author:: Atmel Corporation: http://www.atmel.com
Support and FAQ: http://support.atmel.no/

Definition in file config.h.

Generated on Wed Sep 23 09:49:35 2009 for ATMEL by

1.5.3


Defines
#define	PROD_TEST DISABLE
#define	USE_ADC
	Enable (define) or not (undefine) the ADC usage.
#define	USBKEY 1
	To include proper target hardware definitions, select target board (USBKEY).
#define	TARGET_BOARD USBKEY
#define	FOSC 8000
	CPU core frequency in kHz.
#define	HID_GENERIC_DEMO_FULL DISABLE
	Define it to generate a firmware compatible with HID Generic Demo FULL.
#define	HOST_SYNC_MODE ENABLE
#define	BAUDRATE 57600
#define	USE_UART2
#define	UART_U2
#define	uart_putchar putchar
#define	r_uart_ptchar int
#define	p_uart_ptchar int
#define	ADC_PRESCALER 32
	ADC Prescaler value.
#define	ADC_RIGHT_ADJUST_RESULT 1
	Right adjust.
#define	ADC_INTERNAL_VREF 2
	AVCC As reference voltage (See adc_drv.h).
#define	SBC_VENDOR_ID {'A','T','M','E','L',' ',' ',' '}
#define	SBC_PRODUCT_ID {'A','T','9','0','U','S','B','1','2','8',' ','M',' ','S',' ',' '}
#define	SBC_REVISION_ID {'0','.','0','0'}
#define	NB_IDLE_POLLING_SOF 2
	--------- Device Mouse configuration -------------------------------------
#define	MOUSE_SPEED 4
#define	MAX_FILE_LENGHT 30