Application configuration

Defines
#define	STK525   1
	Enable (define) or not (undefine) the ADC usage.
#define	TARGET_BOARD   STK525
#define	FOSC   8000
	CPU core frequency in kHz.
#define	BAUDRATE   57600
#define	USE_UART2
#define	uart_putchar   putchar
#define	r_uart_ptchar   int
#define	p_uart_ptchar   int
#define	ADC_PRESCALER   64
	ADC Prescaler value.
#define	ADC_RIGHT_ADJUST_RESULT   1
	Right adjust.
#define	ADC_INTERNAL_VREF   2
	AVCC As reference voltage (See adc_drv.h).
#define	SBC_VENDOR_ID   {'A','T','M','E','L',' ',' ',' '}
#define	SBC_PRODUCT_ID   {'A','T','9','0','U','S','B','1','2','8',' ','M',' ','S',' ',' '}
#define	SBC_REVISION_ID   {'0','.','0','0'}

---

Define Documentation

#define STK525   1

Enable (define) or not (undefine) the ADC usage.

To include proper target hardware definitions, select target board (USBKEY)

Definition at line 68 of file config.h.

#define TARGET_BOARD   STK525

Definition at line 69 of file config.h.

#define FOSC   8000

CPU core frequency in kHz.

Definition at line 73 of file config.h.

#define BAUDRATE   57600

Definition at line 79 of file config.h.

#define USE_UART2

Definition at line 80 of file config.h.

#define uart_putchar   putchar

Definition at line 82 of file config.h.

#define r_uart_ptchar   int

Definition at line 83 of file config.h.

#define p_uart_ptchar   int

Definition at line 84 of file config.h.

#define ADC_PRESCALER   64

ADC Prescaler value.

Definition at line 90 of file config.h.

#define ADC_RIGHT_ADJUST_RESULT   1

Right adjust.

Definition at line 92 of file config.h.

#define ADC_INTERNAL_VREF   2

AVCC As reference voltage (See adc_drv.h).

Definition at line 94 of file config.h.

#define SBC_VENDOR_ID   {'A','T','M','E','L',' ',' ',' '}

Definition at line 96 of file config.h.

#define SBC_PRODUCT_ID   {'A','T','9','0','U','S','B','1','2','8',' ','M',' ','S',' ',' '}

Definition at line 97 of file config.h.

#define SBC_REVISION_ID   {'0','.','0','0'}

Definition at line 98 of file config.h.

---