Go to the source code of this file.
Defines | |
| #define | NF_AUTO_DETECT_2KB FALSE |
| ************ Auto-detect mode | |
| #define | NF_AUTO_DETECT_512B FALSE |
| #define | NF_TYPE_MT29F2G08AACWP |
| ************ Static mode To enable a reference, you shall define a NF_TYPE_X (X = reference) | |
| #define | NF_N_DEVICES 1 |
| ************ For all mode Define the number of NandFlash connected (= number of Chip Select) | |
| #define | ERASING_ALL DISABLE |
| !!! Don't change following parameters | |
| #define | NF_CACHE_LUT_LOG_SZ 64 |
| #define | NF_CACHE_FBB_LOG_SZ 32 |
| #define | _ASSERT_ DISABLE |
| #define | Nf_access_signal_on() |
| Function linker for NF access indications. | |
| #define | Nf_access_signal_off() |
| #define | NF_XMCR_MODULE_SHARED DISABLED |
| External Memory Interface settings This driver uses the XMCR interface to accede to the NF, but the port could be shared with another peripheral (like a LCD module). | |
| #define | NF_CLE_ALE_MANUAL ENABLED |
Definition in file conf_nf.h.
| #define NF_AUTO_DETECT_2KB FALSE |
| #define NF_TYPE_MT29F2G08AACWP |
| #define NF_N_DEVICES 1 |
************ For all mode Define the number of NandFlash connected (= number of Chip Select)
Definition at line 73 of file conf_nf.h.
Referenced by main(), nf_cache_fbb_flush(), nf_cache_fbb_refill(), nf_cache_lut_flush(), nf_cache_lut_refill(), nf_check_fbb(), nf_check_lut(), nf_cleanup_memory(), nf_copy_tail(), nf_dfc_write_stop(), nf_erase_old_blocks(), nf_open_write(), nf_rebuild(), nf_scan(), nf_swap(), nf_translate(), nf_write_lut(), nf_xfer_update_vars(), and ut_nfc_erase_all().
| #define ERASING_ALL DISABLE |
| #define NF_CACHE_LUT_LOG_SZ 64 |
| #define NF_CACHE_FBB_LOG_SZ 32 |
| #define Nf_access_signal_on | ( | ) |
Function linker for NF access indications.
Values : Nf_access_signal_on() The linked function is called when a read/write operation to NF starts Nf_access_signal_off() The linked function is called when the read/write operation to NF ends
Definition at line 108 of file conf_nf.h.
Referenced by nf_nf_2_ram(), nf_ram_2_nf(), nf_read_10(), nf_usb_stop(), and nf_write_10().
| #define Nf_access_signal_off | ( | ) |
Definition at line 109 of file conf_nf.h.
Referenced by nf_nf_2_ram(), nf_ram_2_nf(), nf_read_10(), nf_usb_stop(), and nf_write_10().
| #define NF_XMCR_MODULE_SHARED DISABLED |
External Memory Interface settings This driver uses the XMCR interface to accede to the NF, but the port could be shared with another peripheral (like a LCD module).
Values: ENABLED : the port driven by XMCR is also used for another peripheral, so XMCR will be disabled (port free of use) when the memory is not acceeded This is done automatically while user only directly calls the following functions :
1.5.3